Motorized Rotating Mount. Easy to mount to any hanging bracket. Rotates one machine between three various degrees of show positions (15, 45 or 90), maximum rotation is 90 degrees.  4-Channel DMX control with variable standalone features.  Includes Snow Machine mount and truss attachment via dual C-Clamps. Designed to increase the disbursement of snow generated by a single snow machine. It will increase the spray pattern from one machine to the equivalent of three machines. It’s rotating angle is factory set to 90 degrees, custom ordered to 15 or 45 degrees. This oscillating unit has the capacity of 75 pounds of hanging weight. This unit can be used with most of our machines. Available in 110V or 220V. 

There is no other standard unit on the market like this repeat cycle timer. The Event Controller/Timer will turn on the unit and repeat the cycle for as long as desired.

Fluid refill pumping system that automatically maintains fluid levels in your special effects devices. Specially designed for Snowmasters snow machines but is compatible with all other equipment that uses liquids. It can be used in machines such as foggers or hazers.
The system detects the fluid level in the equipments small built in reservoir and signals a transfer pump connected to a multi-supply drum to refill the reservoir, all without user intervention. This is an ideal solution for installations with limited or difficult access such as ceilings or stages.

Not warrantied under regular SnowMasters warranty program, but under “30 Day Limited Warranty”.

*If you will be using the Auto Refill System in temperatures below freezing, a thermal bundle will be required. Call for pricing and other information.

The snow machine hardwire remote™ is a design specifically to control all SnowMasters snow machines. Uses as a remote control source to operate snow machines on the 900 mode. Remote includes a 25 foot five pin DMX male quick connect. The remote cable can be extended by adding longer length five pin DMX cable. This remote actually is a two channel DMX simulated controller. It can be used on any two channel device (such as the Holey Smokes). When used in any snow machines it can be daisy chained to as many machines as necessary.

Supports up to 132 Pounds with a Maximum Height of 9' 8". The StandTek 3000 is the first stand in the new line of the Mobil Tech International series combining innovative new features with proven Mobil Tech quality. In its original design as the SP1TA, this stand has been sold world-wide for years and is known as having a superior value for a light-weight tri-pod stand. With its recent design improvements and transformation into the new StandTek 3000, it now offers even more value and performance at a competitive price. (more . . .)

Each Section = 12 inch X 5 feet Truss. Quik Stage offers three separate choices of aluminum trussing designed to work perfectly with any one of the Mobil Tech stands and truss adaptors. We offer Duo, commonly known as Ladder Truss, Trio, commonly know as Tri Truss and Quatro, commonly know as Box Truss.

Each of our truss designs come standard with a quick-connect system designed to make assembly quick and easy saving you valuable labor time. The following drawings will show you exactly how easy it is to assemble. Manufactured by Milos Structural Systems and carries a life time warranty against defects in materials and workmanship under normal use.

The Pocket Console™ is the inexpensive source for the smallest, most graphic "hands-on" and "user-friendly"DMX-512 theatrical lighting console made.

  • It is small, lightweight, portable and designed to be hand held
  • Levels are set using eight faders (slider pots)
  • Each FADER has an associated bump button
  • 512 dimmer addresses are patchable to any of the eight faders
  • The faders are patchable using from 0 to 512 dimmer addresses
     per fader
  • The unit is powered by a 9v battery OR by a 120v AC power supply

Designed to make controlling "instant-on" effects easy. Provides momentary output to any of three devices attached to the output. Input is a single 110 volt supply. Three momentary switches allow momentarily activation of the corresponding output power plug. Each output is held "on" for as long as the button is pressed. Each switch can handle up to 15 amps with a maximum combined load of 20 amps at 110 volts. Ideally suited for equipment such as CO2 devices, confetti, lighting and other special effects equipment requiring short or quick activation. Eliminates the need for expensive control equipment or DMX controllers. Ten foot power cord included. (GFI protection recommended for wet/outdoor applications and available separately.)

Exclusively designed for the Snow Curtain. This devise permits the control of snowfall on the snow curtain. From a gentle fall to heaver snow fall. Great for non theatrical application such as window displays were a theatrical light board is not used.

Neutrik X-Series 5 Pin Nickel XLR's - compression strain relief.
Available in 3 pin and shorter or longer lengths.

Used for any of our snow machines. Controls power on and off only. Up to 100 feet and up to 4 different frequencies available. Comes with key chain"On-Off" remote controller.

This item can only be used with The Amazing Snowman. Controls power on and off only. Includes battery.

For all snow machines. Line voltage relay pack plugs directly into the power input of the snow machines.

Custom fitted vinyl cover has access flap for gallon snow liquid reservoir. Standard in black. (Available in other colors but these are not stock items. Allow 6-8 weeks.)

Make your T-1100 outside rated for rain or shine. Easy to install and still have access to the controls and gallon reservoir. Made out of all weather vinyl. Standard in black. (Available in other colors but these are not stock items. Allow 6-8 weeks.)

Designed for those that want to leave their T-1500 or T-1500 Mini outside. Easy installation. Protects the electronics without reducing the performance. Access to the control is still available with a velcro access panel. Standard in black. (Available in other colors but these are not stock items. Allow 6-8 weeks.)

Theme park designed for the extended outdoor theaters. Easy to install. Now you can leave your machine in the rain without worry of damaging the machine.
Easy access to the one gallon reservoir and the controls. Standard in black. (Available in other colors but these are not stock items. Allow 6-8 weeks.)

Engineering Rated at 5 gallons. Used for suspending fluid reserve alongside snow machines. The bracket is highlighted in yellow in the image.

Especially designed for each snow machine. This ATA transit case is form fitted for each style of SnowMasters snow machine.
  •The T-1500, T-1500 Mini, & T-1600 cases have wheels
    for easier transport

Supports up to 176 Pounds with a Maximum Height of 13' 5". Of all the Mobil Tech stands available in its wide range of stands, the SpTek 4000 is one of the most popular stands we offer. Its maximum height of 13' 6" and weight support up to 176 pounds, makes this the perfect stand for any mid-range lighting or sound application. (more . . .)