CO2 Jets are a blast for clubs and parties. Make it look cool and cold on any dance floor from 90 degrees to 30 degrees in 6 seconds with our special effects CO2 Cryo-Jet. Instantly create special effect plumes of cryo going up to 30 feet high. Can be hung from a truss or mounted from a wall or the floor. With the push of a button on the CO2 Blaster Master Control (sold separately), create instant CO2 fog, release the control and the fog is gone in seconds. No need to worry about any alarms, as CO2 and leaves the room clean. Unit comes with a 20 foot hose to connect to a CO2 tank, all for only $1,500.00 plus shipping. Note: This is the newest electric solenoid packaged in the protective metal container.

Carbon Dioxide, CO2, is a tasteless, colorless, odorless, nonflammable, liquefied gas. Carbon dioxide is an integral part of the basic life cycle in nature. It is exhaled by humans and animals, then used by plants to help them grow. Plants, in turn, release oxygen, which people depend on for survival. The nozzle sprays the liquid up into the air causing the surrounding humidity to condense into fog.

This unit is the hand held version of our very popular Cryo-Jet. The Cryo-Gun shoots a 15’ x 4’ CO2 plume where ever and whenever the operator wants it. Used in bars or clubs for that extra little blast from the DJ booth. Also popular in stage productions when the blast is needed in a very specific spot. Note: This is the newest electric solenoid packaged in the protective metal container.

SnowMasters offers a rebuild kit for $40. Call 256-229-5551 for more information.

SnowMasters first smoke effect. Years of research have gone into making the first compact self contained ring vortex generator. Known in the industry as a ring rocket, SnowMasters has made great advancements making the unit self contained and compact. This unit can be truss mounted and angled in any direction. Perfect for chimney effect, great for night club dance floors and an incredible light effect. DMX onboard and hard wire remote. Can be set on a timer. The coolest new effect in decades.

The ultimate smallest fogger in the world, known as the "Tiny", is designed for the movies and tight areas. Have you ever seen a movie when a car hood is opened and steam is coming from the radiator? That is the Tiny Fogger. Since the unit can be used by battery or electricity, it is very versatile. The Tiny can be triggered by tethered remote and also wireless remote. Other interesting accessories such as Y-splits and tubing can be added to the output. The tiny fogger uses tiny fluid. The tiny fluid is the highest grade fog fluid on the market today. The fog consumption in this unit is one of the lowest in the industry. In other words, it uses very little fog fluid for very high output fog. This unit is versatile for any situation that requires fog in the most remote places. The fog head fits within the palm of your hand.

Low Lying Fog never looked better when used as ground cover fog in movies and in theatres world wide. The Cryo-Fog is a powerful 2200 Watt low fog machine.

The Cryo-Fog is a fog generator, a fan and a cooling chamber built into a compact flight case (67 x 51 x 30 cm) with space next to the fog generator to hold a 5 liter can of fluid. Liquid CO2 is used to cool down the fog of the inbuilt low temperature fog generator. Therefore the machine produce thick low fog which distributes evenly.

The machine is powerful enough to fill even big stages with low fog within a short time. The liquid CO2 is delivered from a low pressure tank (20 - 24 bar), which is connected to the machine via a hose.

Reliability and high performance describe the Model 1750. The machine comes in two versions: Standard and DMX. The Standard version offers fine volume control as well as on-board timers. The DMX version has the same controls as the Standard version as well as the ability to operate the machine from a lighting control board using DMX. Using improved heat exchanger design, the Model 1750 delivers over 40% more fog than the Model 1700 but can still be used on a standard circuit. Another feature of the Model 1750 is that it can easily be daisy chained, allowing up to 4 machines to be operated from a single remote control. The fog outlet cowling accepts the standard Rosco hose adaptor and ducting hose system. Like most Rosco fog machines, the Model 1750 can be operated with the Rosco Chiller Module or Rosco Coldflow for low-lying chilled fog. The Model 1750 gives a high burst of fog and then ramps back to give continuous fog at any volume setting with no interruption for a reheat cycle. With few replacement parts this machines proves to be an easy machine to service and maintain. The Rosco Model 1750 accepts either the 4 liter or 2.5 liter Rosco fog  fluid bottle, which makes it accessible to the entire range of Rosco fluids. This versatile machine has many  applications in theatre, clubs, rental and industrial applications.

Dimensions:
20 in. (50.8 cm) (L) x 9 in. (22.86 cm) (W) x 9.5 in. (24.13 cm) (H).
Weight: 22 lb. (9.98 kg.)
Heater: 1500W
Power requirements: 120v, 60Hz, 15 amps 240v, 50Hz, 7 amps
Maximum fluid consumption: 4.25 liters/hour
Warm-up time: 8 minutes.

The latest in the growing line of Delta effects machines, the Rosco Delta Hazer represents a new approach to creating atmospheric effects. With a unique water-based fluid, a 1000 watt heat exchanger and a high quality blower, the Delta Hazer can quickly create enough haze for any size venue. By turning just one knob, the fan and pump speed are varied for optimum output and, even at high speeds, the machine will run continuously. Using the award winning Delta Technology™, the Delta Hazer has a variety of features not seen in other machines including: on-board DMX, low fluid sensor and auto timers. More importantly, the Delta Hazer has a new continuous self cleaning feature that insures long life. Like the rest of the Delta line, the Delta Hazer is easy to service and holds a large 4-liter bottle.

Dimensions:
17.75 in. (45.1 cm) (L) x 14 in. (35.5 cm) (W) x 12.25 in. (31.1 cm) (H).
Weight: 16 lb. (7.25 kg.)
Heater: 1000W
Power requirements: 120v, 60Hz, 10 amps 240v, 50Hz, 5 amps
Maximum fluid consumption: 1 liter/hour
Warm-up time: 2 minutes.

A compact direct drive pump assembly for commercial or residential installations. The low noise level makes it easy to work with. Features auto shut off solenoid, internal adjustable pressure regulator (200-1000 psi max.) Has a nozzle capacity of 20-136 nozzles depending on model. Can be mounted up to 400 ft from mist line for remote placement of pump.

  • All weather stainless steel enclosure
  • Direct drive
  • Self priming
  • Ceramic plunger design
  • 0.5-3.0 GPM at 1000 PSI flow rate depending on model
  • Internal adjustable pressure regulator
  • Positive displacement pump
  • Stainless steel check valves
  • 1/2 HP-2.2HP depending on model 120 VAC or 220 VAC
  • Capacitor start motor
  • 5 Micron replaceable filter cartridge
  • Size: 11" W x 21" L x 18.5" H, 28 lb